Clack water softener

Clack Water Softener

What you will learn from the content of this interesting article:

1. The harm of hard water

2. The principle of operation of the Clack softener

3. Advantages of Clack softener

4. Recommendations

1. Harm from hard water

Everyone knows that hard water is very harmful. The first fact is that it is harmful to health. Excessive use of water, which has a high content of calcium and magnesium salts, leads to the exacerbation of chronic problems, the appearance of stones and salt deposits. The second fact: it causes damage to appliances and plumbing fixtures. Pipes cannot withstand constant exposure, deposits and scale form. Plumbing fixtures are also prone to scaling. Heating elements stop performing their tasks and use more resources than they should.

And if in domestic terms the overconsumption of resources will not be so noticeable, but on an industrial scale it will be a big waste. That is why hard water is softened. For country houses and industrial facilities, the equipment is installed almost identical. Only the size and performance differ. Their task is to remove hardness salts and make water acceptable for use.

Hard water can not be used either in the home or in industry. Yes, and it is different in characteristics. Dishes can not be washed, there are streaks. Laundry is not washed. The skin dries out, hair and nails break. In such conditions, the overall state of comfort drops significantly. Industrial activities will not be able to process products and use hard water for other purposes. Because again, plaque and deposits remain. At the same time, the quality of manufactured products falls, they will not be able to be stored for the prescribed time. If it comes to boiler rooms, here in general hard water is the worst enemy of the equipment. Due to deposits, heating elements deteriorate. It is very difficult to clean such deposits afterwards. And the larger the scale, the more difficult it is to remove. Chemical means and mechanical impact are used. And for this it is necessary to stop production. Therefore, it is much easier to soften the water in advance.

The selection of the system is based on the primary data. And this is the composition of the source water. The choice of technology is affected by the concentration of impurities, water temperature and the presence of additional substances. There are several basic methods of softening with a large flow of liquid. This is with the help of ionic resin and reagents. For the domestic sector, the use of chemicals is undesirable. Because softening is mainly for domestic use. And reagents can leave some compounds in the water in the process of chemical reactions. Also the method is not relevant for food production. Ionic resin is a more universal option, which is not inferior in performance to chemicals.

Fig. 1 Water softener filter with Clack valve

2. Operating principle of the Clack water softener

The Clack water softener works on the basis of ion exchange technology. The unit consists of a water tank, a drainage layer, a gravel layer, a Clack control unit, a filter medium and a salt solution tank.

The principle of operation is based on ion exchange. Water enters the main tank, passes the ionic loading. In this case, the exchange occurs: calcium and magnesium salts adhere tightly to the resin, and it releases water sodium ions. The flow is then passed to the consumer.

Ion load allows you to purify a fairly large volume of water in a short time. Of course, over time it fills up it needs to be cleaned. But this does not require replacement, it simply activates the regeneration mode. At this stage, the load is flushed when all impurities are removed. If the ionic resin needs sodium saturation, a salt solution is added to the flushing cycle, which is made in a special container. It is fed into the system and the ionic load is again filled with sodium ions and the filtration mode can be started.

Regulate regeneration, water softening and creation of salt concentrate control units Clack. The manufacturer took care of the usability of the valves, adding several functions. Control units allow you to turn on backwashing, filtration mode, washing with the use of salt concentrate. And all this happens in automatic mode. That is, there is no need to worry that the ionic load will lose efficiency and stop producing softening. The control unit will independently react to the changes and turn on the necessary mode. All settings are set in advance.

Ion resin can be used for softening in various industries. It is non-toxic and does not change the basic characteristics of water, unlike other technologies. This method can be used to purify both drinking water and technical water. The possibility of regeneration only reduces the cost of filter replacement. And automation of the system allows to remove the human factor and possible errors.

Fig. 2 Standard water treatment scheme with softener filter

3. Advantages of the Clack softener

Clack softener is a fully automated system, which is able to produce high-quality softening. It can be used in various industries and in the treatment of well water in country houses.

Softening does not use reagents, so it is suitable even for softening drinking water. Clack control units allow you to control the system and optimize its operation. First of all it concerns regeneration, one of the softening cycles. They have the ability to include different variants of the program, depending on the need. Secondly, it is a quality element, which is able to work for a long time without failures. On some other models it is possible to fail or delay the start of the program. Clack control units work like a Swiss watch, although the manufacturer is the USA. They allow you to build the correct cycle of the system.

Like control units, all other elements are made of quality materials. They are anti-corrosive and are not adversely affected by other harmful impurities that may be contained in the water. They are able to withstand prolonged load and work in an uninterrupted mode. That is, they are oriented for long operation, which is especially relevant for industrial production.

Clack softeners can work with a variety of source water. The temperature should not exceed 35 degrees, which is unacceptable for other systems. Allow for the treatment of a large volume of water. Some systems can not boast of such capacity. And you have to choose either quality or speed of purification. With softeners Clack such a choice will not have to make. They effectively soften water without spending a lot of time.

Fast regeneration. At the stage of washing the load, filtration is suspended. The speed of purification is large enough, but it is still worth focusing on the initial data of water and performance. If the water is very saturated with hardness salts and requires constant cleaning, regeneration will be more frequent and longer in time. But usually it does not take very long, even with a heavy filter load.

4. Recommendations

Choosing equipment for water softening should take into account a large number of nuances. And want to immediately pick up a system that will soften almost any water. In this case, it is desirable that she had minimal demands and needs.

Such softeners are Clack. Effectively and quickly clean water from hardness salts. Do not consume a lot of energy, which makes them a head above other systems. Does not require large expenditures for operation. That is, it is not necessary to constantly supplement the load or change filters.

The entire system consists of high-quality elements that are designed for a long service life. Special service is not required. It is enough just to periodically visually check the system. Clack softeners can be modernized. They work perfectly well on their own. But they can be implemented as part of the overall water treatment system. This fact is very important because not all filters can be used in the process of modernization and interact with other equipment.

Water softening is an important step in any water treatment system. Hard water is very damaging. Therefore, it is better to immediately install softening equipment than to constantly struggle with the consequences of hardness salts. Equipment and technology are selected depending on the purpose of water. But, in any case, it is desirable to avoid the use of chemicals and use safer technology. Therefore, Clack softeners are the priority when choosing equipment for hardness salt removal.

Below is a video on assembling a water softener with a Clack valve