Wagner reverse osmosis system 250 l/hour

WAGNER reverse osmosis system in automatic mode consists of units fully ready for operation. All equipment is assembled and tested at the factory. Each system is equipped with a minimum set of safety automatics and control devices.

Purpose: Reverse osmosis systems of “WAGNER” series are designed for additional water purification and allow to obtain water of high purification degree, which is necessary for technological processes of various productions: the main area of application: cafes, bars, kindergartens, schools, technological processes of water treatment of productions.

The degree of purification of organic and inorganic impurities is 85-98%. Water quality at the outlet corresponds to drinking water standards.

Requirements to the initial water:

• Water temperature +5 - +45℃;
• Level of salt content not more than 2000 mg/l;
• Initial water pressure not less than 1.7 atm not more than 7 atm;
• Hardness not more than 7 mg-eq/l (if the hardness is higher, it is necessary to install a water softener or anti-scalant dosing system before the reverse osmosis system);
• Iron content not more than 0.3 mg/l (at higher values before the reverse osmosis system it is necessary to install a water deferrizer or anti-scalant dosing system);
• Manganese content not more than 0,1 mg/l (at higher values it is necessary to install a water deferrizer or anti-scalant dosing system before the reverse osmosis system);
• Heterotrophic bacteria not more than 1000 pcs/ml. 

• Diaphragm type: 4040
  Number of membranes: 1
  Maximum capacity, l/day: 6000
  Maximum capacity, l/hour: 250
  Overall dimensions, mm: 1285*689*612 mm
  Weight, kg: 65

  BASIC EQUIPMENT OF THE UNIT:

  1. Filter housings (20” Big Blue)
  2. Cartridges (20” Big Blue):
  2.1. Pre-filter with a filter rating of 5 microns ;
  3. Inlet solenoid valve
  4. Booster pump - (by model type).
  6. Diaphragm housing
  7. Reverse osmosis membrane (membrane type 4040)
  8. Flushing solenoid valve
  9. Pressure regulator
  10. Flow meter kit
  11. Manometer set
  12. Steel frame
  13. Multifunctional control cabinet with the possibility of connecting:
  - anti-scalant dispenser,
  - booster pump,
  - solenoid valves,
  - dry run sensor,
  - aeration compressor,
  - ultraviolet sterilizer,
  - tank top level sensor,
  - high-salinity conductometer signal,
  - de-ironing filter.

!!! Additional functions are not included in the basic equipment of the reverse osmosis system. Payment is made additionally.

1. Presence of possibility of connection of pump-doser antiskalant, that allows to use the system in conditions of high hardness and mineralization of water (artesian boreholes, highly mineralized waters).
2. Availability of the possibility of connecting the aeration compressor, which allows you to use the system together with the aeration system for preliminary water treatment.
3. availability of multifunctional control cabinet, which allows to fully automate the system operation and does not require constant supervision and participation of personnel in the work.
4. The presence of a line of recycling concentrate, which allows you to effectively use 85% of the source water and only 15% to drain.
5. Compactness, ease of installation and operation of Wagner reverse osmosis systems.

Download the declaration